Roots Blower, AQUASUST, 220 V, Electric

Roots blower — 220 V, power source Electric. The complete factory specification follows. Made by Hangzhou Aquasust Water Technology Co., Ltd. (3 years on the platform, typical reply ≤3h). Quantity and destination market determine the final price — tell us both for a firm quote.

Key Features of This Roots Blower

• Model Number: AS-SL
• Power Source: Electric
• Rated Voltage: 220 V
• Blade Material: AL7075,Ti,SUS
• Speed: 0-120000
• Warranty: 3 Years

Technical Specifications

Product Details

Products Description

Aquasust High Speed Turbo Blower

Suspension high-speed centrifuge is a compressed air production system that applies a number of technologies such as AirBearing,Impeller, Permanent MagnetSynchronous High Speed Motor, Inverter, Controller, Cooling System, ete. It is asingle-section centrifugal blower that is connected to a Permanent Magnet Synchro-nous Motor driven by an inverter.

Product Features

1.Installation Diagram

(1)Save 20%~50% energy compared to existing products

(2)Can pay back the initial investment in a short period of time: 2-3 years
(3)Use of high speed operation and high efficiency design

(4)Minimizes mechanical losses through direct connection.

2.Easy To Install And Maintain

(1)Only the inhalation filter needs to be changed periodically

(2)Automatic detection and handling of error content function

(3)No special foundations or anchors are required because there is no vibration.

(4)Minimized installation time

3.Easy Operating

(1)Provides user-friendly interfaces

(2)Provides automatic operation modes as required in the field -Low noise and no vibration below 80dB

(3)Oil-free lubrication system

High Speed Centrifuge Turbo Blower Parameter

Core Technology

Original Imported Host

1.The host adopts Korea NAMWON TURBO ONE INC.

2.Stable performance and high efficiency of the mainframe

Suspended Bearing

1.Non-contact, virtually maintenance-free No vibration of bearings, very low noise.

2.Low influence of ambient temperature, dust,
etc. Adequate start/stop durability guarantee

Impeller

1.Small operating range, high SURGE stability and full pressurization assurance

2.High strength, suitable for high temperature and
high pressure severe working conditions.

Appilication Senerio

Textile mill printing and dyeing wastewater treatment

Paper industry wastewater treatment

Water treatment Plant

Packing and Shipping

Usually the goods will be packaged in wooden box and box.We can also customized your required,if you need any special.

Recommend Products

Certifications

About us

AquaSust is a reliable, one-stop products,service for wastewater projects companies

We have over 16 years of experience in plastic manufacturing and good resources for manufacturers. We consist of research, productdevelopment, production, and sales of plastic products for the water treatment industry. The main products are MBBR Bio Filter Media, Tube Sludge Clarifier, Bio Block Filter Media, MBR Membrane Bio-Reactor, Disc Bubble Diffuser, Bubble Tube Diffuser, Spiral Mixing Aerator, Random Tower Packing, Sludge Dewatering Machine, Water Treatment Plant and so on. We are committed to product innovation, the continued introduction and being a global supplier of advanced technology. Our highly trained, experienced customer service and sales professionals are in place to guarantee satisfaction, saving you time and money.

FAQ

Q: Hydrophilic and moisturizing membrane

A: Reinforced composite PVDF membrane uses hydrophilic modified PVDF raw materials, the membrane has good hydrophilicity, and no hydrophilic treatment is needed in the site. However, if the diaphragm is not put into use immediately after it is installed, or it needs to be parked for a certain period of time during use, please ensure that the diaphragm is immersed in water or it is always in a wet condition.

Q: Maintenance of membrane flux and membrane cleaning
A:Diaphragm aeration system construction using perforated aeration, aeration of bubbles and water flow, so that the film full of jitter, to achieve self-cleaning of the membrane. Using the intermittent operation mode, the self-priming pump can suck for 10 to 12 minutes and stop for 2 to 3 minutes, which can effectively prevent the clogging of the membrane holes and ensure long-term and stable operation of the membrane separation. When used for the first time, the microbiological culture of the biochemical pool achieves good activity, and the membrane is only put into operation when the viscosity is small.

Ordering and Pricing

• Minimum order quantity: 1 set
• Volume pricing:
  • 1–99 set: US $6199 / set
  • 100–999 set: US $5999 / set
  • 1000+ set: US $5899 / set
• Ships from: China
• Customization: OEM and ODM accepted on qualifying volumes.

Frequently Asked Questions

What is the minimum order quantity for this roots blower?

The standard minimum order quantity is 1 set. Trial orders can usually be arranged for buyers evaluating the product before a full production run.

What warranty is provided?

The manufacturer provides a 3 Years warranty. Spare parts and technical support remain available after the warranty period.

Can the roots blower be supplied for my local voltage?

The standard configuration is 220 V. Alternative voltage and frequency builds are available when specified at the time of order.

Do you accept OEM or custom branding?

Yes. Custom logo, colour, packaging and specification changes are accepted on qualifying order volumes. Send your artwork and technical requirements with your enquiry.

How long does production and delivery take?

In-stock configurations typically ship within 7–15 days. Customised or large-volume orders are usually produced in 25–35 days, confirmed on order.

About the Manufacturer

This product is produced by Hangzhou Aquasust Water Technology Co., Ltd., based in China. The company 3 years as a verified Alibaba.com supplier, Trading Company. Browse the full Hangzhou Aquasust Water Technology Co., Ltd. range on HVACR Nexus.

See more in Blowers on HVACR Nexus.