INDOTHERM EQUIPMENT CORPORATION

Manufacturer & Trading Company & Distributor/WholesalerHaryana, ChinaVerified supplier 12 yrs

INDOTHERM EQUIPMENT CORPORATION is a manufacturer and trading company based in Haryana, China, supplying 2 product to HVACR Nexus across radial fans.

What we can confirm Counted from this supplier’s live listings on HVACR Nexus

Products listed: 2
Categories: 1
Typical warranty: 1 Year
Certifications: ISO 9001-2008
OEM / ODM: Accepted

Reported by the supplier As published 27 August 2026 — not verified by us

Response time: ≤4h; Average reply to enquiries
Trade Assurance: US $2,000; Covered order limit

Figures published by Alibaba.com for this supplier's verified account and shown here as reported. They reflect the supplier's own trading record, not reviews of HVACR Nexus.

Showing all 2 results

Centrifugal Blower, Radial, 14-15, 500, CFM
$375.00
- 415V
- Power Source Electric
- Material Steel
View & Inquire
Centrifugal Blower, Radial, 415V, Electric
$2,000.00
- 415V
- Power Source Electric
- Material Steel
View & Inquire

Source Directly from INDOTHERM EQUIPMENT CORPORATION

Tell us which model and quantity you need. We handle the enquiry, the specification check and the quotation, and come back with pricing and lead time.

Your name

Work email

WhatsApp / Phone

Estimated order quantity

Sample 1-5 units — evaluation Small batch 6-99 units — pilot run Volume 100-499 units — series purchase 500+ units per year — annual programme

What do you need?

Verifying INDOTHERM EQUIPMENT before you order

We can confirm what this manufacturer lists on this site and nothing beyond that. Whether the company is a real factory, holds the certificates it claims, or is financially sound is not something we are able to verify — and a platform that implies otherwise is not doing you a favour. What follows is how to check it yourself, in about ten minutes.

Run the supplier check in an AI search tool Opens with the check already written. Use a tool with web search switched on.

ChatGPT ↗ Perplexity ↗ Claude ↗ Google AI Mode ↗

The check asks for a source on every point and requires the tool to state what it could not find — that part is usually the most informative. Treat the answer as a starting point for your own questions, not as a verdict.

See the exact wording being sent

I am sourcing HVAC/refrigeration equipment and considering "INDOTHERM EQUIPMENT CORPORATION", reportedly based in Haryana, China. Act as a procurement due-diligence analyst. Use web search and cite a source for every point. Where you cannot confirm something, say so explicitly rather than inferring it — an absence of records is itself a finding.

1. Legal entity — registered name, registration number, address, year established. Does the registered name match the trading name?
2. Factory or trader — evidence of actual production: a factory address distinct from the office, capacity, staff numbers, audit reports. Many listings described as manufacturers are trading companies.
3. Certifications — which are claimed (CE, UL/ETL, CSA, RCM, ISO 9001), and can any be confirmed in the issuing body's own public database rather than only the supplier's material?
4. Independent presence — trade shows, industry directories, trade associations, several B2B platforms; or only its own website?
5. Track record — how long the domain and the company have been active, and whether there is evidence of continuous operation.
6. Red flags — non-delivery reports, quality disputes, litigation, or claimed capability the evidence does not support.

Sources to check:
- Independent listing of their published product range: https://www.hvacrnexus.com/brand/indotherm-equipment-corporation/

End with a verdict (proceed / proceed with checks / do not proceed), the three most important unknowns, and what I should ask the supplier directly to close them.

What to ask the supplier directly

Business licence and the factory address. Ask for the licence and check the address is a production site, not an office or a residential unit. A trading company is not disqualifying — but you should know which one you are buying from, because it changes who controls quality and lead time.
Certificates naming your exact model. Certificates are issued against specific models and standards. Ask for the certificate and the test report, and check the scope section names the model, rating and configuration you intend to order.
A video walk of the production line. Ask for an unedited walk-through on a live call rather than a produced video. It costs them nothing if the line exists.
Two references in your region. Customers who bought the same product into a similar market, whom you can contact. Reluctance here is informative.
Third-party inspection before shipment. Naming an inspection body in the purchase order is the single most effective protection on a first order, and it costs a fraction of a bad container.

Start with a sample or a small trial order regardless of how the checks go. No amount of documentation substitutes for having handled the product.

What INDOTHERM EQUIPMENT CORPORATION Supplies

Current listings sit in Radial Fans. Listed pricing is US $2000 per unit at standard quantities. Every listing carries the full manufacturer specification, and quantities are quoted against your own volume.

Sourcing from INDOTHERM EQUIPMENT CORPORATION

OEM and ODM production is accepted on qualifying volumes, covering custom branding, colour, packaging and specification changes; export documentation includes ISO 9001-2008; the standard warranty across most listings is 1 Year. Send your target quantity and destination market with an enquiry and a quotation with current lead times will follow. Trial orders can usually be arranged before committing to a full production run.

Model references

Series and model codes appearing in INDOTHERM EQUIPMENT listings on this site. Each code links directly to the listing it belongs to.

IEC-HP 17-20

Other manufacturers in the same categories

Comparable suppliers listing in Radial Fans — useful for a second quotation or a backup source.

Questions buyers ask about INDOTHERM EQUIPMENT

What is the minimum order quantity?

MOQ is set per model and depends on whether the item is a stock line or built to order, so it is quoted rather than published. Send the model or specification with your target volume and the current MOQ comes back with the quotation.

Does INDOTHERM EQUIPMENT accept OEM or ODM orders?

OEM and ODM are accepted on qualifying volumes across most listings — typically covering branding, colour, packaging and specification changes. What counts as a qualifying volume varies by product, so confirm it with your enquiry.

What certifications are available?

The approvals held vary by model rather than applying across the whole range. The specification tabs above show what each listing carries; if your market requires a particular approval, state it in the enquiry so only compliant models are quoted.

What are typical lead times?

Stock items ship in days; built-to-order production usually runs in weeks and depends on volume and season. Lead time is confirmed with the quotation because it moves with the order book.

Can I order a sample first?

Trial orders can normally be arranged before committing to a production run. Sample cost and whether it is credited against the first order are confirmed case by case.