Variable Speed
Units with variable speed control — EC motors or inverter drives. Fan power falls with the cube of speed, so trimming to actual demand is where most of the running-cost saving in ventilation comes from.
- 2,411products with this specification
- 800verified manufacturers
- 12equipment categories
Which equipment is available as Variable Speed
A specification like this cuts across categories, so the useful question is not “what is it” but “which equipment types offer it, and how much choice is there in each”.
Applications that call for Variable Speed
- Commercial Kitchen Ventilation & Refrigeration Lets extract volume follow the cooking line rather than running flat out all service.
- Data Center Cooling Equipment Fan power falls roughly with the cube of speed, so part-load hours are where the savings actually are.
- Cleanroom & Pharmaceutical HVAC The mechanism that keeps airflow constant as HEPA filters load.
- Pharmaceutical & Vaccine Cold Chain Storage Holds a stable band instead of cycling around it — stability is what mapping rewards.
- Paint Booth & Spray Finishing Ventilation Lets extract follow spray and flash-off cycles instead of running flat out all shift.
- Welding Fume Extraction Matches suction to the number of stations actually welding.
- Warehouse Ventilation & Destratification Gentle continuous mixing works better than intermittent high speed.
- Layer House Ventilation Staged and proportional control keeps rate matched to conditions rather than cycling.
- Swine Barn Ventilation Stage ventilation smoothly across growth phases rather than cycling.
- Edge & Micro Data Centre Cooling Loads are small and vary; fixed-speed equipment cycles and wears.
- Free Cooling Retrofit Fan power falls with the cube of speed — the largest single saving in the system.
- High-Density & AI Rack Cooling Flow follows rack load rather than running at design flow permanently.
- Cloud & Dark Kitchen Ventilation Lets each unit follow its own service hours instead of running flat out.
- Hotel & Banquet Kitchen Ventilation The difference between paying for the peak all day and paying for what you use.
- Vertical Farm & Indoor Growing HVAC Trimming to actual load across the light and dark cycle.
- Mushroom Growing Climate Control CO₂ is steered continuously; fixed-speed ventilation cannot follow the phases.
- Indoor Pool Dehumidification Evaporation varies with bather load and cover use; fixed-speed over-ventilates and wastes heat.
- Semiconductor & Electronics Cleanroom Air Closed-loop control holding flow constant as filters load.
- Hospital Operating Theatre Ventilation Holding the cascade while doors are used, and setting back unoccupied theatres.
- Fan Filter Unit Selection Closed-loop constant volume, not open-loop speed setting.
Often specified alongside
Specification combinations that actually occur in this catalogue — counted from the products themselves, not assumed.
Showing 1–36 of 2411 results
-
- Power Source manual
- Motor controller
-
- Power Source Regulator
- Motor controller
-
-220vac Motor, 110V
$11.50- 220V AC
-
- 12V
- Blade Diameter 7in
- Power Source Electric
-
- Three Phase
-
- Three Phase
-
- Single Phase
-
- 24 (V)
- Power Source Electric
- Blade Material Plastic
-
View & Inquire
-
Adjustable Speed Boiler, Cast Iron
$1,100.00- Customised Sizes
- Cast Iron
-
- 230 V
- Power Source Electric
- Blade Material Plastic
-
- DC 12V
- Power Source Electric
- Blade Material Plastic
-
View & Inquire
-
- Material PC
-
- 5 V
- Power Source Electric
- Material Plastic
-
- 400 V
- Power Source Electric
- Material Aluminum
-
- 230V
- 630mm(24.80in)
- Power Source Electric
-
- 220V
-
- 220V
-
- 230V
- 2390 m3/h
- 380W
-
- 220V
- Electric Blower
- PWM signal
-
- 24 inch 600mm
- 250 W
- Material Metal
-
- 18–28.9 in
- 170 W
- Material Metal
-
- 8001-10000 BTU
- Power Type AC
- 22-44 dB(A)
-
- 230V
- Power Source Electric
- Stainless Steel
-
- 240V
- Power Source Electric
- Blade Material Plastic
-
- 45CFM±10%
- 3.2W
- Noise 15-30dBA±10%
-
- 600mm
- Power Source Electric
- Material Metal
-
- 12v
- 92cfm
- 7.2w
-
- 220V/240V
- 1800mm
- Corded Electric
-
- 230 VAC
- 2000m³/h
- 0.9/1.2/1.5/2m
-
- 12V-24V
- 88CFM
- 5.52w
-
- 12V/24V
- Aluminum Alloy
- 2400 Speed(RPM)
-
- 24 V
- Stainless Steel
-
- 230 VAC
- 0.9/1.2/1.5/2m
- 110V/60HZ
-
- 214 CFM
- Corded Electric
- Material ABS