Gas Heater, Iron, Freestanding

 

[Heater security device]

·The heater should first be placed outdoors or in a well-ventilated indoor space,Secondly, ensure that there is always sufficient fresh circulating air provided,A well-ventilated area means there must be25%The Open Space of the.
·Always maintain minimum distance from flammable objects.Top at Least in40cmLong,At Least Around60cmLong,And keep the small covering objects from being collected2cmDistance,At the same time, prevent them from floating around due to airflow.
·The heater must be firmly placed on a level surface.
·Do not place the heater in areas with explosive gases,For example, a place where gasoline or other flammable liquids are stored.
·To protect the area from wind impact on heating,Secure the chassis to the ground using screws.

[Leak Detection]

The pipeline connection part has been inspected at the factory.However, during shipment it may have been randomly placed or subjected to excessive pressure,Therefore, it is necessary to conduct a pre-inspection of the pipe's stability at a specific location:
·During leak testing, the cylinder must have relatively slow liquefied gas,To ensure test pressure
·Ensure safety control valves are in place"OFF"Location
·Open the liquefied petroleum gas cylinder valve
·Use a mixture of dish soap and water,And use a spray bottle or brush,Use tools such as rags to apply liquid to the pipe joint,If bubbles appear, it indicates an air leak here
·If there is a leak at this time, immediately close the valve of the liquefied petroleum gas cylinder,Tighten the part where there's air leakage,Reopen the liquefied petroleum gas cylinder valve and conduct a test,Until there's no air leakage
·Smoking is prohibited when detecting air leaks

Attention:After use, you must wait for re-ignition5Minutes,Let the hot reflective cover cool down,Then According to"Ignition Heater"Operating

[The Extinguishing Heater]

Turn the control button clockwise toOFFBit,Completely close the valve on the liquefied gas cylinder

[Store]

·After use, completely close the valve on the liquefied gas cylinder

·Remove the pressure relief valve and unscrew the nut connecting the hose clockwise

·Check if the gas valve is loose or damaged,If There Is Damage,Please exchange for a new one

·Do not store liquefied gas cylinders in basements or places without proper air circulation

[Cleaning and Maintenance]
·Wipe off the dust on the surface of the heater with a damp cloth,Use a suitable cleaner for cleaning the spray-coated surface,Do not use flammable or corrosive organic solvents to clean the heater
·Remove the dust from the heater's head,Stay Clean,For safe use