Frequency Drive for Pump, ACD190, 15KW, 380V, 50/60Hz

Key specification for this frequency drive for pump: power phase number Three Phase, type AC Power Inverter. Everything below is reproduced from the factory data sheet. Made by Qingdao Speedo Industry & Commerce Co., Ltd. (8 years on the platform, typical reply ≤1h). For a binding price and lead time, send the volume you need and where it ships to.

Key Features of This Frequency Drive For Pump

• Model Number: ACD190-4T15GB
• Power Phase Number: Three Phase
• Rated Power: 15KW
• Nominal Voltage: 380 V
• Warranty: 12 Months
• Place Of Origin: Shandong, China

Technical Specifications

Product Details

Product Display

Parameters

Input	Rated voltage . frequency	Three phase AC380V:50/60Hz Single phase AC220V:50V60Hz
		Allowable range of voltagevariation	Three phase AC360V-450V Single phase AC190V – 250V
Output	Voltage	0-460V :0-260V
		Frequency	low-frequency mode : 0- 300Hz High-frequency mode : 0-3000Hz
		Overload capacity	G Model:110% long term 150% 1 min 200% 4 second P Model:105% Long term 120%1 min 150%1 second
Control Model			V/F control, advanced V/F control, V/F separation control, PG free current vector control
Control Characteri stics	Frequency setting resolution	Analog input	0.1% of maxximum output frequency
				Digital settings	0.01Hz
		Frequency accuracy	Analog input	Within 0.2% of the maxirum outout frequency
				Digital input	Set output frequency within 0.01%
		V/F control	V/F curve	The reference frequency can be set arbitrarily from 0.5 to 3000Hz, and the multi-point V/F curve can beset arbitrarily. Multiple fixed curves such as constant torque, reduced torque 1, reduced torque 2, andsquared torque can also be selected
				Torque boost	Manual setting: 0.0~30.0% of rated output Automatic lifting: Automatically determine the lifting torque based on the output current and combined with motor parameters
				Automatic current and voltage limiting	It can automatically detect the stator current and voltage of the motor during acceleration, deceleration,or stable operation, and suppress them within the allowable range based on a unique algorithm.minimizing the possibility of system fault tripping
Control Characteri stics	Inductive vector control	Voltage frequencycharacteristics	Automatically adjust the output voltage frequency ratio based on motor parameters and unique algorithms
				Torque characteristic	Starting torque: 150% rated torque at 3.0Hz (V/F control) 150% rated torque at 1.0Hz (advanced V/F control) 150% rated torque at 0.5Hz (without PG current vector control) Steady state accuracy of operating speed: s 0.2% of rated synchronous speed Speed fluctuation: ≤ 0.5% rated synchronous speed Torque response: ≤ 20ms (without PG current vector control)
				Self measurement ofmotor carmeters	Without any limitations, automatic parameter detection can be completed under both static and dynamic conditions of the motor to achieve the best control effect
				Current and voltage suppression	Full process current closed-loop control, completely avoiding current impact, with complete overcurrent and overvoltage suppression function
		Running Under voltage suppression	Especially for users with low grid voltage and frequent fluctuations in grid volage, even within the allowable voltage range, the system can maintain the longest possible operating time based on unique algorithms and residual energy allocation strategies
Typical functions	Multi speed swing and operation	16 segment programmablemulti segment speedcontrolwith multiple operating modes available.Swing frequency operation:preset freguency and center frequencv adiustable. state memory and recovery after power outage
		PID control RS48 communication	Built-in PID controller (with preset freauency) with standard RS485 communication function, multiple communication protocols available. and linkage svnchronization control function
		Frequency setting	Analog input	DC voltage 0-10V, DC current 0-20mA (upper and lower limits optional)
		Output signal	Digital input	settings with analog inputs Operation panel settings,RS485 interface settings, UP/DW terminal control, and multiple combination
			Digital Output	One Y-terminal open collector output and two programmable relay outputs (TA, TB, TC), with up to 61 meaning options
			Analog Output	1 channel analog signal output, with a flexible output range between 0-2mA or 0-10V, which can achieve the output of physical quantities such as set frequency and output frequency
		Automatic voltage stabilization operation	According to needs, dynamic voltage regulation, static voltage regulation, and non votage regulation can be selected to achieve the most stable operating effect
		Acceleration and deceleration time setting	0.1s~3600.0min continuously settable, S-type and linear mode optional
		Brake	energy consumption braking	The starting voltage, return voltage, and energy consumption braking rate of energy consumption braking can be continuously adjusted
			direct current braking	Starting frequency of DC braking during shutdown: 0.00- [ F00.13 ] Upper limit frequency Braking time: 0.0-100.0 seconds; Braking current: 0.0%-150.0% of rated current
			Flux braking	0-100 0:Invalid
		Low noise operation	The carrier frequency is continuously adjustable from 1.0KHz to 16.0KHz, minimizing motor noise
		Speedtrackingspeed restart function	It can achieve smooth restart and instant stop restart functions of the motor in operation
		Counter	One internal counter for easy system integration
		Operation function	Upper and lower frequency settings, frequency jump operation, reverse operation limit, slip frequency compensation,RS485 communication, frequency increase and decrease control, fault self recovery operation, etc

Product Details

Product Application

Products Category

Company Profile

Packaging&Delivery

Q: Is the output voltage of our inverter stable ?
A: Our inverter is designed with a good regulator circuit. You can even check it when measuring the true value by a multimeter.

Q: What should be noticed when installing inverter?
A: Put the product in a place where is well ventilate,cool, dry and water-proof. Do not stress or put foreign objects into the
inverter.

Q: Can I get some samples for test?
A: Yes.

Q: Do you accept OEM/ODM ?
A:Yes.

Q: How is delivery time?
A: Usually it takes 5-10 days for regular type , for large orders or OEM/ODM orders, pls negotiate with sales.

Q: What’s your payment terms?
A: We accept T/T, L/C, WEST UNION, ALI TRADE ASSURANCE, cash.

Q: What’s your warranty time?
A: We offer 12 months warranty service, life time technique support.

Q : How do you control quality ?
A : Our production follow ISO9001 quality control system strickly. After four time quality inspection and high temperature
testing, we will print "QA" pass.

Q : what kind of certificate do you have ?
A : We have ISO9001, CE.

Ordering and Pricing

• Minimum order quantity: 1 piece
• Volume pricing:
  • 1–49 piece: US $155 / piece
  • 50–99 piece: US $152 / piece
  • 100+ piece: US $79.3 / piece
• Ships from: China
• Customization: OEM and ODM accepted on qualifying volumes.

Frequently Asked Questions

What is the minimum order quantity for this frequency drive for pump?

The standard minimum order quantity is 1 piece. Trial orders can usually be arranged for buyers evaluating the product before a full production run.

What warranty is provided?

The manufacturer provides a 12 Months warranty. Spare parts and technical support remain available after the warranty period.

Which certifications does this frequency drive for pump carry?

It is supplied with CE ISO9001 documentation, which covers the requirements of most import markets. Additional test reports can be issued on request.

Can the frequency drive for pump be supplied for my local voltage?

The standard configuration is 380 V. Alternative voltage and frequency builds are available when specified at the time of order.

Do you accept OEM or custom branding?

Yes. Custom logo, colour, packaging and specification changes are accepted on qualifying order volumes. Send your artwork and technical requirements with your enquiry.

How long does production and delivery take?

In-stock configurations typically ship within 7–15 days. Customised or large-volume orders are usually produced in 25–35 days, confirmed on order.

About the Manufacturer

This product is produced by Qingdao Speedo Industry & Commerce Co., Ltd., based in China. The company 8 years as a verified Alibaba.com supplier, operates its own manufacturing. Browse the full Qingdao Speedo Industry & Commerce Co., Ltd. range on HVACR Nexus.

See more in Speed Controllers & Regulators on HVACR Nexus.