Industrial Water Scroll Chiller, Inverter, R410a

This industrial water scroll chiller is published with the manufacturer’s full specification — 380V/3P/50HZ, cooling capacity 75~1040 KW. Made by Shandong Volks Air Conditioner Group Co., Ltd. (5 years on the platform, factory-assessed). For a binding price and lead time, send the volume you need and where it ships to.

Key Features of This Industrial Water Scroll Chiller

• Model Number: LQSWRF780MGA
• Voltage: 380V/3P/50HZ
• Cooling Capacity: 75~1040 KW
• Heating Capacity: 75~1040 KW
• Refrigerant: R-410A
• Warranty: 1 Year

Technical Specifications

Product Details

Product introduction

Air cooling (hot) water units can be divided into single cooling and heat pump two types according to the function. Heat pump air cooling unit with refrigeration and heating functions all in one, can not only realize cooling in summer and heating in winter.It is widely used in the area where in winter there is heating needs and there is no place for air conditioning, heating boiler and heating network. It has become the preferred equipment in HVAC engineering solutions. The unit adopts modular design, with the cooling capacity of 390 kW, 520 kW, 780 kW, 910 kW and 1040 kW, and the maximum cooling capacity of 1040KW*4=4160KW. After optimized design and careful matching, advanced control technology is integrated to ensure the reliability and performance of the product. This series of units can be combined with fan coil units, cabinet air handlers, ceiling air processors, fresh air units, combined air processors and other air-conditioning terminal equipment to form a semi-centralized or centralized central air-conditioning system. This series of unit without having to build room, can be directly placed on the roof of the buildings, the skirt building platform or on the ground, which is safe and clean. There is no cooling water system,cooling towers, cooling water pump, and the corresponding pipe system and many other accessories. Simple structure, convenient maintenance make it especially suitable for water shortage area.

Details Images

Working principle of the unit

Air-cooled modular air conditioning unit is an integrated central air conditioning equipment with air as the cold (hot) source, water as the cooling (hot) medium and cold (hot) source. Modular air cooling (hot) water unit, realize heating in winter through consumption of part of the electrical energy, by drawing out the low-grade energy in the air to supply heating; In Summer, it draws the indoor heat out to release into the air to achieve the purpose of air cooling.

Products Description

Compressor

The unit adopts the world famous brand compressor, which can realize the efficient operation of the full pressure ratio and obtain better comprehensive operation efficiency.

Title goes here.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

Electronic EEV

Precise adjustment of cooling capacity, more energy-saving operation. Adopt high-precision electronic expansion valve to ensure stable and efficient operation under all working conditions.

Water-side heat exchanger

The water-side heat exchanger adopts a new shell-and-tube heat exchanger with high efficiency, and the heat exchange tube is a high-efficiency copper tube with internal thread, which enhances the heat exchange efficiency between the water side and the refrigerant side, optimizes the pipeline layout and baffle design, ensures low water resistance and high efficiency, and has a large internal waterway flow area, which is not easy to block and scale, prolongs the cleaning cycle and ensures the long-term operation stability of the unit.

Condensing fan

Adopt high efficiency and low speed fan, low noise, and adopt fully sealed scroll compressor, with rubber shock absorber at the bottom as standard, which runs smoothly.

Product Paramenters

Model							LSQWRF390MGA	LSQWRF520MGA	LSQWRF780MGA
Ambient dry/wet bulb temperature	Inlet/outlet water temperature	Capacity	Unit
35℃	12/7℃	Cooling Capacity	KW	390	520	780
				Power Input	KW	133.5	178	267
				COP	KW/KW	2.92	2.92	2.92
Compressor					Type	Scroll	Scroll	Scroll
						Qty	6	8	12
Fan					Type	Axial fan	Axial fan	Axial fan
						Qty	6	8	12
Power supply					V/N/HZ	380/3/50	380/3/50	380/3/50
Refrigerant					kg	R410A/6*13.5	R410A/8*13.5	R410A/12*13.5
Evaporator	Type		Type		Shell and tube	Shell and tube	Shell and tube
		Water Flow			m³/h	67.08	89.44	134.16
		Pressure Drop			kPa	52	58	58
		Connect Size			DN	125	150	2-125
Dimension	Length			mm	4000	5250	7800
		Width			mm	2270	2270	2270
		Height			mm	2450	2450	2450
Weight	Net Weight			kg	4100	5350	8000
		Runing Weight			kg	4400	5600	8300
Noise					dB(A)	75	75	80

Model							LSQWRF910MGA	LSQWRF1040MGA
Ambient dry/wet bulb temperature	Inlet/outlet water temperature	Capacity	Unit
35℃	12/7℃	Cooling Capacity	KW	910	1040
				Power Input	KW	311.5	356
				COP	KW/KW	2.92	2.92
Compressor					Type	Scroll	Scroll
						Qty	14	16
Fan					Type	Axial fan	Axial fan
						Qty	14	16
Power supply					V/N/HZ	380/3/50	380/3/50
Refrigerant					kg	R410A/14*13.5	R410A/16*13.5
Evaporator	Type		Type		Shell and tube	Shell and tube
		Water Flow			m³/h	156.52	178.88
		Pressure Drop			kPa	62	65
		Connect Size			DN	2-150	2-150
Dimension	Length			mm	9250	10500
		Width			mm	2270	2270
		Height			mm	2450	2450
Weight	Net Weight			kg	9300	10700
		Runing Weight			kg	9500	11000
Noise					dB(A)	80	85

product dimensions

Model：LSQWRF390MGA LSQWRF520MGA

Model：LSQWRF780MGA LSQWRF910MGA LSQWRF1040MGA

Installation Instructions

Unit hoisting

When lifting with a crane, handle it carefully. Use a flat belt or steel cable to bind the lifting steel pipe for lifting. There should be a pad at the contact between the steel cable and the machine to avoid injury to the equipment. The steel cable at the hook should be wound around the hook to avoid danger due to unbalanced weight.

Unit installation specification

The installation of the unit shall meet the following requirements: 1)Ensure that air inlet and exhaust are smooth; 2)Avoid being affected by dirty and corrosive airflow; 3)There should be room for outdoor unit maintenance; 4)The impact on the surrounding environment should be minimized; 5)Condensate and defrosting water should have drainage channels. 6)Unit installation refer to the recommended spacing to ensure smooth airflow. There should be no obstacles up there. If the top space is insufficient, install a curved air duct to direct the air far away to avoid short circuit and affect the unit performance.

Company Profile

Shandong Volks Air Conditioning Group

Shandong Volks Air Conditioning Group, started from an HVAC manufacturing plant in 1993. After nearly 30 years of development, it
becomes to be a high-tech enterprise with advanced production equipment and modern workshop which covers nearly 200,000 ㎡ in
Dezhou . It is a supplier of integrated solutions for air source heat pump and central air-conditioning systems. Our business
covers development, design, production, sales, installation and maintenance.

The company attaches great importance to all-staff technical progress and technological innovation, and forms a team of industry experts, technical authorities and company technicians and also gained lots of national patents. We passed CRAA, IS09001:2015 system, IS014001 and HSAS18001:2007 system, AAA credit rating and other international and domestic certificates.

We also have import and export right . The products have obtained the EU CE certification, SGS factory certification and ROHS certificate. All kinds of products have passed the inspection of the National Air Conditioning Testing Center; We also established four major labs: national standard central air conditioning laboratory, national standard central air conditioning terminal laboratory, ultra-low temperature -35℃ air-cooled heat pump experiment and drying laboratory.
The main products includes central air-conditioning unit series, ultra-low temperature air source heat pump unit series, drying unit series, edible fungus breeding unit series, direct expansion unit series, constant temperature and humidity unit series, air-conditioning terminal series, etc. All products are 100% inspected . Products are widely used in: commercial real estate, large supermarkets, hotels, hospitals, schools, office buildings, bio-pharmaceuticals, electronic chemicals, data centers, smart communities, smart energy, bathing centers, aquatic product breeding, animal husbandry breeding, edible fungus breeding ,Industrial and agricultural drying, household central air-conditioning and other fields, the products sell well in China and are also exported to Russia, South Korea, Pakistan, India, Southeast Asia, the Middle East, Europe, Africa, America ,etc.
We looks forward to working with you to improve environmental quality and create a better life!

Exhibition

Ordering and Pricing

• Minimum order quantity: 1 piece
• Volume pricing:
  • 1–9 piece: US $29000 / piece
  • 10–99 piece: US $28900 / piece
  • 100+ piece: US $28800 / piece
• Ships from: China
• Customization: OEM and ODM accepted on qualifying volumes.

Frequently Asked Questions

What is the minimum order quantity for this industrial water scroll chiller?

The standard minimum order quantity is 1 piece. Trial orders can usually be arranged for buyers evaluating the product before a full production run.

What warranty is provided?

The manufacturer provides a 1 Year warranty. Spare parts and technical support remain available after the warranty period.

Can the industrial water scroll chiller be supplied for my local voltage?

The standard configuration is 380V/3P/50HZ. Alternative voltage and frequency builds are available when specified at the time of order.

Do you accept OEM or custom branding?

Yes. Custom logo, colour, packaging and specification changes are accepted on qualifying order volumes. Send your artwork and technical requirements with your enquiry.

How long does production and delivery take?

In-stock configurations typically ship within 7–15 days. Customised or large-volume orders are usually produced in 25–35 days, confirmed on order.

About the Manufacturer

This product is produced by Shandong Volks Air Conditioner Group Co., Ltd., based in China. The company 5 years as a verified Alibaba.com supplier, operates its own manufacturing, passed third-party supplier assessment. Browse the full Shandong Volks Air Conditioner Group Co., Ltd. range on HVACR Nexus.

See more in Chilling Equipment on HVACR Nexus.