Industrial Commercial Heat Pump, Can be customized 3P

Built-in integrated dryer features

1. Heat pump dryer integrates dehumidification, heating, control, exhaust temperature and ventilation

Intelligent equipment is a new type of energy saving and emission reduction drying equipment.

2. Intermediate heat exchange dehumidification and dehumidification using double-effect dehumidification technology, greatly improving dehumidification

The wet performance ratio has obvious energy saving effect.

3. Break through the technical bottleneck solution of traditional dehumidifiers and ordinary heat pump dehumidifiers

The dehumidification performance of traditional dehumidification equipment under high temperature and low humidity conditions is poor or even idling

(The compressor runs without removing water) Technical difficulties.

4.Unique exhaust heat recovery design: reduce heat loss of emissions, comprehensive

Better performance;

5.The advanced fresh air pre-dehumidification function can ensure that the fresh air is dry, suitable for strict

Drying process;

6. The high-temperature heat pump dryer is an environmentally friendly and energy-saving drying equipment.

No harmful substances will be generated during the process, and there will be no smoke or

An open flame is generated, and the temperature and humidity can be modulated according to the characteristics of the dried material, which is intelligent

The degree is high.

7. There is no need for special person to take care of the drying process. After the material is baked or the drying temperature reaches

After reaching, the unit will automatically stop to achieve energy saving effect.The unit is at normal temperature and pressure

The biggest feature is reflected in energy saving, its energy saving is red than that of electric heating tube

External microwave and other energy saving is more than 50%, 40% energy saving than oil burning, and energy saving than coal burning

20%-30%, and the unit will generate cold air during the drying process

Direct discharge into the workshop can increase the room temperature.

8. Convenient installation: easy installation and demolition, less floor space, can be installed in the room

inside and outside;

9. Efficient and energy-saving: Only a small amount of electrical energy can be consumed to suck in the air

Receives a lot of heat, and the power consumption is only 1/4 of the electric heater; the same as coal,

Compared with oil and gas dryers, it can save about 60% of operating costs. 1 degree

Electricity is equal to 4 kWh.

10.Environmental protection and no pollution: without any burning matter and emissions, it is a sustainable

Continue to develop environmentally friendly products.

Qingzhou Huanli Refrigeration Equipment Co., Ltd. is a professional manufacturer of refrigeration and air treatment equipment in Mainland China. Founded in 2008, the company is a high-tech enterprise integrating science, industry and trade, creating a natural living space and subtle exquisiteness. The production environment is our responsibility. We are committed to the R&D and production of refrigeration and air treatment equipment required by industries, businesses and other industries. It is a high-tech enterprise integrating research, production and trade.

Products are widely used in metallurgy, petroleum, chemical, solar photovoltaic, automotive, pharmaceutical, food and other industrial fields and hospitals, hotels, office buildings, shopping malls and other commercial places. The company takes "specialty products as the featured industry service" as its development strategy, develops products in professional industries, and embarks on a new development path. The products are mainly divided into three series: process cold source equipment series, air treatment unit series, product integration series. These include industrial production of edible fungi special machines, central control mode chillers, grain coolers, industrial chillers, screw chillers, freeze dryers, air source dryers, food refrigeration units, cold storage, cooling towers, etc. Refrigeration equipment products.

Pre-Sales Service

*Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to install the machine, training how to use the machine.

* Free spare parts replacement within warranty period.

* Professional after-sales department to provide technical support, all complaints should be replied within 24 hours.

* Engineers available to service machinery overseas.

Q1. Are you manufacturer or Trade Company?

A.We are professional factory, founded in 1998. OEM available!

Q2. What's the order process?

A.Inquiry—provide us all clear requirements.

Quotation—official quotation form with all detail specifications.

Contract confirmation—provide correct contract details.

Terms of payment— By T/T 30% downpayment, balance before shipment.

Production—mass production

Testing—8hours, to ensure the quality of the machine

Shipping— by sea, train. Detailed picture of package will be provided.

Q3.What terms of payment you use?

A.T/T, L/C, etc. Installation—install video/install manual

Q4. How to get a prompt quotation?

A.When you send the inquiry to us, please kindly send it with below technical information.

1). Application:

2). Cooling capacity: _____KW or _____ Kcal/hr or _____RT.

3). Outlet temperature:

4). Power supply: 3PH 380V/50HZ or 3PH 230V/60HZ or 3PH 440V/60HZ.

5). Location of your factory, we have to know the weather condition.

6). Any other special requirements: 5. Any technical support need or purchase need please contact to us!