High Temperature Axial Fan, 400mm, 500mm, 1000mm, Aluminum

Key specification for this high temperature axial fan: 220V/380V, air flow 5000-7500 CBM/h. Everything below is reproduced from the factory data sheet. Made by Fujian Huada Electric Co., Ltd. (12 years on the platform, typical reply ≤2h). For a binding price and lead time, send the volume you need and where it ships to.

Key Features of This High Temperature Axial Fan

• Model Number: GKF-4
• Power Source: Electric
• Power: 1.1 kw
• Voltage: 220V/380V
• Rated Voltage: 230v/380v
• Air Flow: 5000-7500 CBM/h

Technical Specifications

Product Details

Large air volume tobacco drying industrial axial flow fans

GKF series high temperature high humidity axial ventilator fan is widely used in the painting,tobacco,wood drying,production of rubber。

About vented exhaust,the fan can be used in the lots of high temperature and high humidity environment,for example:the factory,the workshop,the office,the warehouse,the basement.The axial fan is unidirectional vented exhaust equipment .

The fans has characteristic of resistance to high-temperature ,large air volume,high pressure,energy-efficient,low noise,convenience maintenance,etc.

As a gas transportation fan without corrosive gas,palpable & gray scale,the gas has no more than 150 mg/ cbm dust and hard particles.

Type:Pipeline type, Wall type,fixed type and Square type

As the blades diameter is different,there are 11 model,No.2.5,3,3.5,4,5,5.5,6,7,8,9,10.The angle of fan can be adjusted according to the clients’ requirements.

The fan blades can be direct connected with the motor.The circumferential velocity of the impeller does not exceed the condition,there are three different rotational speed:2900 r/min,1450 r/min,960 r/min.When face the air inlet ,the blades are counterclockwise rotation.

Tech Data

Item No.	Speed （rpm)	Motor No.	Power (KW)	Total pressure (Pa)	Hydrostatic(Pa)	Air Volume(m³/h)	No. of blades	Noise(dB)
2.5	2900	631-2	0.18	120-160	40-110	2200-1400	4	≤64
				632-2	0.25	130-170	50-116	2500-1500	4	≤65
		1450	631-4	0.12	55-60	20-28	1600-1000	4	≤59
3	2900	632-2	0.25	120-180	80-150	3200-1800	4	≤68
				633-2	0.37	140-200	90-170	3500-2000	4	≤68
		1450	631-4	0.12	60-80	30-60	2200-1200	4	≤61
3.5	2900	711-2	0.37	200-250	130-200	4500-2500	4	≤71
				712-2	0.55	250-280	150-220	5200-3000	4	≤72
		1450	711-4	0.25	80-100	35-65	3500-2200	4	≤63
4	2900	712-2	0.55	230-300	145-250	5500-3000	4	≤73
				801-2	0.75	250-330	145-270	6500-4000	4	≤74
				802-2	1.1	270-380	150-320	7500-5000	6	≤75
		1450	711-4	0.25	80-106	40-80	4300-2500	4	≤66
				712-4	0.37	100-120	50-95	5000-2800	6	≤68
				801-4	0.55	110-130	70-90	5200-3200	6	≤68
5	2900	90S-2	1.5	250-450	150-420	8500-5200	4	≤90
				90L-2	2.2	300-550	200-500	10000-6000	4	≤90
				100L-2	3	400-600	250-550	12000-7000	4	≤90
		1450	712-4	0.37	110-140	70-114	7000-4500	4	≤85
				801-4	0.55	115-150	75-120	7500-5000	4	≤70
				802-4	0.75	140-170	80-137	8700-5400	6	≤74
				802-4	0.75	190-210	110-170	9000-6000	8	≤75
				90S-4	1.1	200-220	135-175	9500-6000	8	≤76
		960	801-6	0.37	84-92	60-77	6300-4300	8	≤63
5.5	1450	802-4	0.75	180-210	120-160	10000-6500	4	≤74
				90S-4	1.1	190-210	125-165	11000-7500	6	≤75
		960	801-6	0.37	80-88	50-73	7300-5000	6	≤65
6	2900	100L-2	3	250-650	150-560	14500-8000	4	≤94
				112M-2	4	400-700	250-630	18000-10000	8	≤94
		1450	90S-4	1.1	195-220	130-180	12500-7500	4	≤76
				90L-4	1.5	250-280	160-230	14500-9000	6	≤78
				100L1-4	2.2	270-310	180-230	16000-10000	8	≤80
		960	801-6	0.37	90-100	70-80	8500-5000	6	≤66
				802-6	0.55	105-114	80-95	9600-6000	6	≤68
7	1450	90L-4	1.5	170-150	100-210	18000-11000	4	≤78
				100L1-4	2.2	200-275	120-230	20500-13000	4	≤80
				100L2-4	3	265-370	150-310	21500-13500	6	≤82
		960	90S-6	0.75	90-120	60-96	14000-9000	4	≤71
				90L-6	1.1	100-130	65-98	15000-10000	6	≤74
8	1450	100L1-4	2.2	200-320	100-280	25000-16000	6	≤80
				100L2-4	3	220-340	110-290	29000-20000	8	≤82
				112M-4	4	300-400	170-340	32000-22000	8	≤86
				132S-4	5.5	320-420	175-360	35000-25000	8	≤87
		960	100L-6	1.5	130-175	75-150	21000-14500	8	≤78
				112M-6	2.2	140-190	78-155	24000-16500	8	≤80
9	1450	132S-4	5.5	300-450	180-370	37000-24000	8	≤88
				132M-4	7.5	320-470	185-380	40000-27000	8	≤89
				160M-4	11	330-480	190-385	42000-30000	8	≤89
		960	112M-6	2.2	170-205	105-150	26500-15000	6	≤82
				132S-6	3	180-230	110-180	29000-18000	8	≤83
				132M1-6	4	210-250	127-210	32000-21000	8	≤83
				132M2-6	5.5	250-320	150-262	36000-23000	8	≤83
10	1450	132S-4	5.5	330-470	200-400	42000-34000	8	≤90
				132M-4	7.5	350-480	210-410	46000-38000	8	≤91
				160M-4	11	400-500	220-415	52000-43000	8	≤92
				160L-4	15	490-610	230-480	56000-46000	8	≤93
				180M-4	18.5	500-640	260-500	60000-48000	8	≤94
		960	132M1-6	4	200-230	130-180	33000-21000	8	≤85
				132M2-6	5.5	260-290	160-250	40000-27000	8	≤85
		730	132S-8	3	160-180	110-135	32000-20000	8	≤83
				160M1-8	4	170-200	115-145	38000-26000	8	≤83

Product Detailed Introduction

Installation

Company Introduction

Fujian Huada Motor Factory established in 1998,registered as Fujian Huada Electric CO.,LTD,located in Fujian Province.It is a modern enterprise which engaged in Scientific research,production,sales and service.Covering an area of 50,000 square meters,of which 40,000 square meters are standard workshop. Huada is more than ten years to focus on the research and development of high temperature motor,high temperature fan;Strictly control the production process ,making the high-quality goods.Products are included MSW series high temperature motor,GKF series flue-cured tobacco special-purpose fan,GKW series full aluminum high temperature and high humidity fan,CRF series grain drying dedicated fan,DJF series multistage high -pressure fan,DRF series diversion type high temperature fan,HTF series high temperature fire smoke exhaust fan,SWF series mixed flow fan and all kinds of high temperature and centrifugal fan and so on. Besides our products passed the CCC certification,European Union CE certification. Best selling in China and overseas markets,Huada as well known brand reputation in the domestic complete set of drying industry. GKF series fan was chosen as the industry standard by the national tobacco administration in 2009. The project of Flue-cured tobacco asynchronous motor with variable speed multistage won the third prize in Ningde science and technology progress and the second prize in Fuan Science and technology progress.

Application

Packing Details

Packing Method :Packed in cartons and then packed on pallets

Ordering and Pricing

• Minimum order quantity: 1 set
• Volume pricing:
  • 1–19 set: US $175 / set
  • 20–99 set: US $165 / set
  • 100+ set: US $155 / set
• Ships from: China
• Customization: OEM and ODM accepted on qualifying volumes.

Frequently Asked Questions

What is the minimum order quantity for this high temperature axial fan?

The standard minimum order quantity is 1 set. Trial orders can usually be arranged for buyers evaluating the product before a full production run.

What warranty is provided?

The manufacturer provides a 1 Year warranty. Spare parts and technical support remain available after the warranty period.

Can the high temperature axial fan be supplied for my local voltage?

The standard configuration is 220V/380V. Alternative voltage and frequency builds are available when specified at the time of order.

Do you accept OEM or custom branding?

Yes. Custom logo, colour, packaging and specification changes are accepted on qualifying order volumes. Send your artwork and technical requirements with your enquiry.

How long does production and delivery take?

In-stock configurations typically ship within 7–15 days. Customised or large-volume orders are usually produced in 25–35 days, confirmed on order.

About the Manufacturer

This product is produced by Fujian Huada Electric Co., Ltd., based in China. The company 12 years as a verified Alibaba.com supplier, operates its own manufacturing. Browse the full Fujian Huada Electric Co., Ltd. range on HVACR Nexus.

See more in Impellers & Fan Blades on HVACR Nexus.