Corrosion Resistant
Fans and exchangers for corrosive airstreams — plating lines, chemical stores, coastal installations. Housing material and coating decide service life; the aerodynamic side is usually the easy part.
- 2,232products with this specification
- 490verified manufacturers
- 12equipment categories
Which equipment is available as Corrosion Resistant
A specification like this cuts across categories, so the useful question is not “what is it” but “which equipment types offer it, and how much choice is there in each”.
Applications that call for Corrosion Resistant
- Greenhouse & Horticulture Climate Control Permanent high humidity plus fertiliser and pesticide spray — ordinary painted steel does not last.
- Poultry & Livestock House Ventilation Ammonia plus washdown. This is the single specification that determines whether the fan lasts two years or ten.
- Industrial Plant & Workshop Ventilation Plating, pickling and chemical process extraction — the duct contents attack the fan continuously.
- Marine & Transport Refrigeration Not an upgrade in this scenario. Salt air is continuous and there is no shelter from it.
- Fish & Seafood Cold Storage Salt plus permanent damp. The single most important specification in this scenario.
- Paint Booth & Spray Finishing Ventilation Solvents and paint residue attack standard coatings.
- Grain Handling & Dust Extraction Damp grain and fumigants attack standard finishes.
- Foundry & Furnace Heat Extraction Combustion products and flux fumes are aggressive once cooled.
- Broiler House Ventilation Ammonia plus high-pressure washdown between crops. Decides whether a fan lasts two years or ten.
- Layer House Ventilation Continuous ammonia exposure over a very long occupancy.
- Swine Barn Ventilation Hydrogen sulphide as well as ammonia — materially more aggressive than a poultry house.
- Dairy Barn Ventilation & Cow Cooling Manure gases and constant damp; parlours are washed down daily.
- Free Cooling Retrofit Outdoor equipment with a 15-year service expectation.
- Bakery & Oven Extraction Condensate is the main cause of duct and fan failure in bakeries.
- Fan & Pad Evaporative Cooling Permanent humidity plus fertiliser and pesticide spray.
- Vertical Farm & Indoor Growing HVAC High humidity plus nutrient solution aerosols.
- Mushroom Growing Climate Control Permanent condensation plus steam sterilisation between crops.
- Fresh Fish & Seafood Counter Salt, fish liquor and constant washdown — the defining requirement.
- Hotel Laundry Ventilation Humidity plus detergent and bleach carryover.
- Indoor Pool Dehumidification Chlorinated humid air. Extends to fasteners and hangers, not just the main components.
- Fishing Vessel Refrigeration Continuous salt exposure with no shelter. Not an upgrade in this scenario.
- Reefer Container & Truck Refrigeration Road salt, sea air and constant washing.
- Engine Room & Machinery Space Ventilation Salt air drawn through the fan continuously for the vessel’s life.
- Semiconductor & Electronics Cleanroom Air Process exhaust carries aggressive chemistry.
Often specified alongside
Specification combinations that actually occur in this catalogue — counted from the products themselves, not assumed.
Showing 1–36 of 2232 results
-
- 380 V
- Power Source Electric
- Fiber Glass
-
- 220/380V
- Stainless Steel
-
- 380 V
- Customer's Request
- 2.6-22KW
-
- 220-240v /1ph/50Hz
- 890W
- R-134A
-
- 400 V
- Power Source Electric
- Material Aluminum
-
- 230V
- 630mm(24.80in)
- Power Source Electric
-
- Power Source Wind
- Blade Material Plastic
- 10 km/h
-
- 700-295100 m³/h
- 2.8-22 mm
- Stainless steel
-
- 380 V
- 5000-60000m3/h
- 16 in
-
- 220 V
- Power Source Electric
- R22/R410a/R407c
-
- 150m3/h - 3500m3/h
-
- 230V
- Power Source Electric
- Stainless Steel
-
- 400 m³/h
- 36 W
- Refrigerant Water
-
- R404A.R134a.R507
-
- 220 V
-
- 220 V
- Power Source Electric
- R410A
-
- 220V/380V/440V
- 10-200kw
- R717
-
- Stainless Steel
-
- Voltage 220VAC
- Power Source Electric
- Material Aluminum
-
- 100V-127V
- R290
- Material Application
-
- 220 V
- Multiple Options
- R290
-
- Voltage 230VAC
- Power Source Electric
- Material Aluminum
-
- 12V/24V
- Aluminum Alloy
- 2400 Speed(RPM)
-
- 12V/24V
- Material Plastic
- Speed customizable
-
- Voltage 230VAC
- Power Source Electric
- Material Aluminum
-
- Voltage 230VAC
- Power Source Electric
- Material Aluminum
-
- 220 V
- 3-22mm
- Power Source Electric
-
- 220 V
- Power Source Electric
- Stainless Steel
-
- Material PVC
-
- 2" -24"
- Material PVC
-
- 100%FR Polyester
-
- 220 V
- Battery Powered
- Material Copper
-
- 220V/380V
- 1157-5344 m³/h
- Stainless Steel
-
- 380/220/400/440V
- Size 6"-80"
- Blade Material Plastic
-
- Stainlesss Steel
-
Air Handling Unit, 3000-30000m3h, AHU
$3,600.00- 3000-30000 cmh
- Stainless Steel